Today
Secret
Unspecified
Unspecified
Construction/Facilities
East Granby, CT (On-Site/Office)
Duties
Indefinite Appointment not to exceed two (2) years. The purpose of the indefinite appointment is to backfill an Airman on active duty. The indefinite appointment will be terminated within 30 days of return of the incumbent to the position.
This is an indefinite position that may convert to permanent without further competition.
JOB SUMMARY: The primary purpose of this position is to provide munitions support to the state and designated agencies in support of their taskings.
NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Air National Guard. Applicants who are not currently a member of the Connecticut Air National Guard must be eligible for immediate membership and employment in the Connecticut Air National Guard. If you are not sure you are eligible for military membership, please contact a Connecticut Air National Guard recruiter at (860) 292-2331 before applying for this position.
The major duties include, but are not limited to:
WORKING CONDITIONS: Works inside and outside; in inclement weather; on icy, wet, and slippery ramps and work stands; and in temperature and humidity extremes. Subject to dangers from exposure to toxic fumes, high pressure air and fluids, fast actuating metal aircraft surfaces such as landing gears, speed brakes, engine noise, heat blast, intake suction; explosive munitions; chemical munitions, electrical voltage, cartridge actuating devices; liquid oxygen, fire or explosion of aircraft fuels, lubricants, paints and solvents. Risk of cuts, bruises, scrapes, burns, respiratory irritation, explosions, and high voltage electrical shock. Wear of safety-toed boots, hearing, and eye protection is required.
PHYSICAL EFFORT: There is frequent standing, bending, and working in tiring positions, although there is occasional sitting down at test consoles or workbenches. It is required to lift, push or pull a variety of items weighing up to 100 pounds or heavier weights with assistance.
Requirements
Conditions of employment
GENERAL EXPERIENCE: Experience or training which has provided the candidate with the knowledge and application of mechanical and electrical principles and the skill to perform intricate repair and adjustment of hydraulic and pneumatic components and devices.
SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 6, 12, or 18 months of specialized experience in the following:
WG-05 REQUIRES 6 MONTHS:
KNOWLEDGE, SKILLS AND ABILITIES:
COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of Branch/AOC/FA/AFSC. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training.
MILITARY GRADE (Prior to Application): Enlisted: E-2 through E-6
UNIT OF ASSIGNMENT: 103d Air Wing or any subordinate unit
MANPOWER NUMBER: 1072-513-L
POSITION SEQUENCE NUMBER: 1063193
SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. This position requires a security clearance (secret) which the applicant must possess or be able to obtain a clearance within one year of appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.
STATEMENT OF DIFFERENCE: Individual selected at a lower level will be issued a Statement of Difference. Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition.
Education
No substitution of education for specialized experience.
Additional information
Primary Change of Station (PCS) relocation expenses will NOT be paid.
To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to E.O.14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine.
This position is represented by the Association of Civilian Technicians, Chapter 97.
Under 32 U.S.C. 709, Veterans Preference does NOT apply.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program (incentives). In order to avoid losing your incentive eligibility, you should check with your serving incentive manager (CTARNG-G1 or CTANG-Retention Office) prior to accepting an offer for the position. For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program, the following termination rule applies:
Incentive Termination without Recoupment: If you accept a Military Technician (Mil Tech) Permanent position where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment as long as you have served at least 6 months of the bonus contract following receipt of the initial bonus payment.
Indefinite Appointment not to exceed two (2) years. The purpose of the indefinite appointment is to backfill an Airman on active duty. The indefinite appointment will be terminated within 30 days of return of the incumbent to the position.
This is an indefinite position that may convert to permanent without further competition.
JOB SUMMARY: The primary purpose of this position is to provide munitions support to the state and designated agencies in support of their taskings.
NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Air National Guard. Applicants who are not currently a member of the Connecticut Air National Guard must be eligible for immediate membership and employment in the Connecticut Air National Guard. If you are not sure you are eligible for military membership, please contact a Connecticut Air National Guard recruiter at (860) 292-2331 before applying for this position.
The major duties include, but are not limited to:
- Production Section is comprised of Precision Guided Munitions (PGM), Conventional Maintenance, Line-Delivery and Munitions Support Equipment Elements.
- Materiel Section is comprised of Operations, Inspections and Stockpile Management Elements.
- The Systems Section is comprised of Munitions Control, Combat Plans, Mobility & Training and Plans & Scheduling Elements.
- Maintains hazardous waste and material according to applicable directives.
- Assembles/Disassembles, adjust configuration, performs maintenance/test & repair, handles and transports ammunition, rockets, unguided and guided weapons and countermeasures, demolition material, and other types of conventional ordnance such as 40MM, Cluster Bomb Units (CBU), Guided Bomb Units (GBU), general purpose bombs, aircraft canon ammunition, missile systems, decoys, countermeasures to include LUU series flares and dispensers for loading on aircraft based on Unit Committed Munitions List (UCML) and Wings training requirements.
WORKING CONDITIONS: Works inside and outside; in inclement weather; on icy, wet, and slippery ramps and work stands; and in temperature and humidity extremes. Subject to dangers from exposure to toxic fumes, high pressure air and fluids, fast actuating metal aircraft surfaces such as landing gears, speed brakes, engine noise, heat blast, intake suction; explosive munitions; chemical munitions, electrical voltage, cartridge actuating devices; liquid oxygen, fire or explosion of aircraft fuels, lubricants, paints and solvents. Risk of cuts, bruises, scrapes, burns, respiratory irritation, explosions, and high voltage electrical shock. Wear of safety-toed boots, hearing, and eye protection is required.
PHYSICAL EFFORT: There is frequent standing, bending, and working in tiring positions, although there is occasional sitting down at test consoles or workbenches. It is required to lift, push or pull a variety of items weighing up to 100 pounds or heavier weights with assistance.
Requirements
Conditions of employment
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- Must meet Compatible Military Assignment within one year from placement.
- Wear of the military uniform is mandatory.
- Direct Deposit is mandatory.
- Must be able to obtain and maintain a secret security clearance.
- Must possess a valid state drivers license.
GENERAL EXPERIENCE: Experience or training which has provided the candidate with the knowledge and application of mechanical and electrical principles and the skill to perform intricate repair and adjustment of hydraulic and pneumatic components and devices.
SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 6, 12, or 18 months of specialized experience in the following:
WG-05 REQUIRES 6 MONTHS:
- Experience or training servicing and adjusting ordnance equipment, such as cleaning, lubricating, assembling, and disassembling parts.
- Experience which has demonstrated the ability to identify and locate troubles by sight.
- Experience in the use of common hand tools.
- Experience showing the ability to follow written instruction.
- Experience or training in dismantling, cleaning and reassembling various ordnance equipment such as; target detecting, arming, control, steering, power and propulsion units and devices.
- Experience which required the ability to diagnose malfunctions.
- Experience in hand tools and a limited number of measuring instruments.
- Experience in the use of a variety of test equipment, such as ohmmeters, voltmeters and meggers.
- Experience interpreting and applying a variety of technical manuals and similar published materials.
- Experience or training in repairing, rebuilding, modifying and testing a variety of major subassemblies.
- Experience in diagnosing malfunctions and determining repair in major components consisting of numerous assemblies, interrelated electrical, mechanical, pneumatic, and hydraulic assemblies, and components.
- Experience in the use of precision measurement equipment.
- Experience interpreting and applying a variety of technical manuals and similar published materials.
KNOWLEDGE, SKILLS AND ABILITIES:
- Knowledge of missile and ordnance systems.
- Ability to identify ordnance by filler, color code, markings, or physical description.
- Knowledge of a wide range of electronics principles, practices, and inter-related processes for the purpose of independently troubleshooting, diagnosing, and repairing electronic, mechanical, or electromechanical faults, issues, etc.
- Skill in interpreting complex drawings, specifications schematics and performs intricate shop mathematics for complete systems.
- Skills in the use of precision measurement instruments such as oscilloscopes, potentiometers, frequency signal generators, etc. as well as in troubleshooting, repairing, calibrating and maintaining missiles and missile test equipment.
COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of Branch/AOC/FA/AFSC. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training.
MILITARY GRADE (Prior to Application): Enlisted: E-2 through E-6
UNIT OF ASSIGNMENT: 103d Air Wing or any subordinate unit
MANPOWER NUMBER: 1072-513-L
POSITION SEQUENCE NUMBER: 1063193
SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. This position requires a security clearance (secret) which the applicant must possess or be able to obtain a clearance within one year of appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.
STATEMENT OF DIFFERENCE: Individual selected at a lower level will be issued a Statement of Difference. Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition.
Education
No substitution of education for specialized experience.
Additional information
Primary Change of Station (PCS) relocation expenses will NOT be paid.
To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to E.O.14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine.
This position is represented by the Association of Civilian Technicians, Chapter 97.
Under 32 U.S.C. 709, Veterans Preference does NOT apply.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program (incentives). In order to avoid losing your incentive eligibility, you should check with your serving incentive manager (CTARNG-G1 or CTANG-Retention Office) prior to accepting an offer for the position. For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program, the following termination rule applies:
Incentive Termination without Recoupment: If you accept a Military Technician (Mil Tech) Permanent position where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment as long as you have served at least 6 months of the bonus contract following receipt of the initial bonus payment.
group id: DOAF
