Yesterday
Secret
Unspecified
Unspecified
IT - QA and Test
Montgomery, AL (On-Site/Office)
Duties
(1) Serves as the Office of Primary Responsibility (OPR) for wing maintenance policy, advising supervisors and employees on both general policy and specific maintenance matters. Makes decisions and recommendations on technical concerns presented by supervisors. Utilizes a comprehensive knowledge and ability to interpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, Air Force Occupational and Health (AFOSH) and environmental standards, public law, and locally developed policy.
(2) Maintenance Standardization Evaluation Program (MSEP): Administers, evaluates, and coordinates a comprehensive quality assurance, maintenance standardization, and inspection program for all areas of the maintenance organization, all maintenance disciplines, job series and Air Force Specialty Codes (AFSCs). Evaluates the quality of maintenance accomplished in the maintenance organization and performs the necessary quality functions to execute the MSEP, designed to provide management an objective sampling of both the quality of equipment and the proficiency of maintenance personnel.
(a) Executes the evaluation program and accumulates data using Inspection and Evaluation techniques such as Task Evaluations, Quality Verification Inspections, Special Inspections, Personnel Evaluations and Management Inspections. Evaluates the quality of in-process and after-the-fact maintenance and ensures prescribed technical and management procedures are followed. Serves as the subject matter expert for critical assessment programs such as; Unit Self Inspections, Maintenance Standardization, Operational Readiness and Unit Compliance Inspections. Responsible for the development and maintenance of organizational level checklists.
(b) Monitors and assesses the organization's quality program and elements of the program to gauge compliance with directives and established processes. Identifies deficiencies, implements corrective measures, and improves processes to enhance mission effectiveness and efficiency. Ensures safety, security, and Consolidated Tool Kit (CTK) programs are followed in accordance with applicable regulations and public law through the routine inspection of work centers.
(3) Utilizes data collection techniques and procedures for evaluation, inspection, and audit programs, evaluates the results and determines the appropriate and effective method and format for presentation to higher-level management. Performs statistical analysis (e.g. normal distribution, averages, means, standard deviations, trending, root cause analysis, etc.) using standard statistical quality control methods.
(4) Collaborates with the Maintenance Group Commander, Maintenance Squadron Commanders, and Quality Assurance Supervisor to plan, develop, implement, inspect, and report numerous critical compliance issues and review the Configuration Management (CM) programs. Manages the Wing Foreign Object Damage and Dropped Object Prevention Program (DOPP) to ensure a sound prevention program is in place to eliminate potential life safety hazards. Administers and manages the Maintenance Complex responsibilities of the Functional Check Flight (FCF), Operational Check Flight (OCF), and High Speed Taxi-check Programs.
(5) Serves as the Aircraft Weight and Balance program manager utilizing complex computer based programs, data bases, electronic weighing apparatus, and integrated weight and balance computers for the Wing to maintain strict accounting of aircraft weight and balance for safe flight operations. Recommends decertification of configuration loads that exceed the safe for flight envelope or ground gross weight restrictions.
(6) Reviews wing depot-level assistance requests developed in accordance with tech orders. Reviews for adequacy and submits engineering disposition requests to the System Program Office (SPO). Serves as the unit point of contact regarding all engineering disposition requests. Ensures all authorized technical data variances are submitted to Plans & Scheduling for inclusion in the aircraft/equipment historical records. Coordinates and works with the engineering functions at the ALC and Air Force Material Command (AFMC) to insure quality assurance plans interface. Coordinates requested actions to comply with engineering changes requests as necessary.
(7) Prepares and reviews Product Quality Deficiency Reports (QDR) prior to releasing to the Air Logistics Center (ALC) or Aircraft Sustainment Group and performs exhibit-processing oversight by coordinating with ALC and Logistics Readiness Squadron to ensure proper exhibit control and handling.
(8) Performs other duties as assigned.
PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.
Requirements
Conditions of employment
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: TSGT
MAXIMUM MILITARY RANK: MSGT
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
SPECIALIZED EXPERIENCE: 1-year specialized experience equivalent to at least the next lower grade. Experience possessed by an expert in specialization able to give technical direction to otherwise competent workers. Experience determining operations when difficult and questionable phases of malfunctions are found. Experience which required significant and concrete work accomplishments (i.e., special projects, working groups, or detailing assignments) involving interpersonal contacts in a quality assurance or related field. Experience in dealing with management principles and supervisory responsibility for the function required by type of position to be filled and the organization involved.
KNOWLEDGE REQUIRED:
--Comprehensive knowledge of assigned aircraft and complex aircraft systems to include but not limited to electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, jet engine propulsion and associated systems, Aerospace Ground Equipment, Support equipment, and related test equipment.
--Knowledge of munitions storage methods, procedures, and techniques to determine storage location based on condition code, compatibility, and security requirements.
--Knowledge of the techniques, documentation, and equipment used in the examination, classification, and maintenance of munitions assets and their components.
--Comprehensive and thorough knowledge of the entire maintenance quality assurance program to include the full range of principles, concepts and methodology and the establishment of procedures for monitoring the quality of products in a maintenance environment.
--Broad knowledge of the practices, policies and procedures of related functional and administrative activities such as Technical Order Distribution Office (TODO), logistics maintenance support functions, contract administration and coordination of CLS or CFT, engineering disposition requests, maintenance production, procurement, supply support, munitions storage etc. and skill in effecting appropriate interface/coordination of quality assurance plans and programs and evaluations with these activities. Broad knowledge of the TCTO and QDR process and the interface/coordination with depot engineering and supply process.
--Thorough knowledge of the Maintenance Standardization Evaluation Program (MSEP).
--Broad knowledge of end items, systems, including quality characteristics and working knowledge of manufacturing methods, special processes and the interrelationship of various parts. Working knowledge of systems, subsystems and end item components and the functional relationships among components and subsystems, and test and measurement techniques.
--Broad knowledge of Higher Headquarters regulations and instructions, PDM work specifications, local directives including Quality Plans, Technical Orders, Military Specifications, and International Commercial Practices such as ISO 9000.
--Comprehensive knowledge of inspection and evaluation techniques, statistical methods, mathematics, production management, industrial management, and database management skills to perform root cause, deficiency, and trend analysis. Analyses are used to validate and update Acceptable Quality Levels (AQLs), frequency changes to Routine Inspection Lists (RILs), and recommendations for corrective maintenance practice action.
--Broad knowledge of the body of laws, regulations, policies and procedures relating to aircraft maintenance, ground, explosive & flight safety, occupational health and environmental compliance. Ability to use this knowledge to develop an evaluation plan and prevention effort to minimize risk and prevent damage to equipment, structures, weapons systems, or injury to personnel.
--Skill in applying this knowledge to the identification of quality problems and resolving the difficult and complex work assignments. Skill to plan and conduct studies, analyze performance and quality data and to develop sound recommendations for correction of quality system deficiencies.
--Ability to conduct technical reviews, analyze findings and develop recommendations for corrections or improvements in the quality assurance program. Ability to prepare technical reports on quality levels, to identify specific problem areas and to recommend corrective action.
--Ability to communicate effectively through written and oral presentations. Skill and ability to work effectively in stressful situations and maintain effective interpersonal relationships at all levels within the organization. Ability to plan and successfully complete individual projects and/or larger projects.
--Skill in using various computer and software applications to include but not limited to: word processing programs, spreadsheets, email services, databases and database management.
Education
SUBSTITUTION OF EDUCATION FOR SPECIALIZED EXPERIENCE:
Ph.D. or equivalent doctoral degree
or
3 full years of progressively higher level graduate education leading to such a degree
or
LL.M., if related
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**
(1) Serves as the Office of Primary Responsibility (OPR) for wing maintenance policy, advising supervisors and employees on both general policy and specific maintenance matters. Makes decisions and recommendations on technical concerns presented by supervisors. Utilizes a comprehensive knowledge and ability to interpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, Air Force Occupational and Health (AFOSH) and environmental standards, public law, and locally developed policy.
(2) Maintenance Standardization Evaluation Program (MSEP): Administers, evaluates, and coordinates a comprehensive quality assurance, maintenance standardization, and inspection program for all areas of the maintenance organization, all maintenance disciplines, job series and Air Force Specialty Codes (AFSCs). Evaluates the quality of maintenance accomplished in the maintenance organization and performs the necessary quality functions to execute the MSEP, designed to provide management an objective sampling of both the quality of equipment and the proficiency of maintenance personnel.
(a) Executes the evaluation program and accumulates data using Inspection and Evaluation techniques such as Task Evaluations, Quality Verification Inspections, Special Inspections, Personnel Evaluations and Management Inspections. Evaluates the quality of in-process and after-the-fact maintenance and ensures prescribed technical and management procedures are followed. Serves as the subject matter expert for critical assessment programs such as; Unit Self Inspections, Maintenance Standardization, Operational Readiness and Unit Compliance Inspections. Responsible for the development and maintenance of organizational level checklists.
(b) Monitors and assesses the organization's quality program and elements of the program to gauge compliance with directives and established processes. Identifies deficiencies, implements corrective measures, and improves processes to enhance mission effectiveness and efficiency. Ensures safety, security, and Consolidated Tool Kit (CTK) programs are followed in accordance with applicable regulations and public law through the routine inspection of work centers.
(3) Utilizes data collection techniques and procedures for evaluation, inspection, and audit programs, evaluates the results and determines the appropriate and effective method and format for presentation to higher-level management. Performs statistical analysis (e.g. normal distribution, averages, means, standard deviations, trending, root cause analysis, etc.) using standard statistical quality control methods.
(4) Collaborates with the Maintenance Group Commander, Maintenance Squadron Commanders, and Quality Assurance Supervisor to plan, develop, implement, inspect, and report numerous critical compliance issues and review the Configuration Management (CM) programs. Manages the Wing Foreign Object Damage and Dropped Object Prevention Program (DOPP) to ensure a sound prevention program is in place to eliminate potential life safety hazards. Administers and manages the Maintenance Complex responsibilities of the Functional Check Flight (FCF), Operational Check Flight (OCF), and High Speed Taxi-check Programs.
(5) Serves as the Aircraft Weight and Balance program manager utilizing complex computer based programs, data bases, electronic weighing apparatus, and integrated weight and balance computers for the Wing to maintain strict accounting of aircraft weight and balance for safe flight operations. Recommends decertification of configuration loads that exceed the safe for flight envelope or ground gross weight restrictions.
(6) Reviews wing depot-level assistance requests developed in accordance with tech orders. Reviews for adequacy and submits engineering disposition requests to the System Program Office (SPO). Serves as the unit point of contact regarding all engineering disposition requests. Ensures all authorized technical data variances are submitted to Plans & Scheduling for inclusion in the aircraft/equipment historical records. Coordinates and works with the engineering functions at the ALC and Air Force Material Command (AFMC) to insure quality assurance plans interface. Coordinates requested actions to comply with engineering changes requests as necessary.
(7) Prepares and reviews Product Quality Deficiency Reports (QDR) prior to releasing to the Air Logistics Center (ALC) or Aircraft Sustainment Group and performs exhibit-processing oversight by coordinating with ALC and Logistics Readiness Squadron to ensure proper exhibit control and handling.
(8) Performs other duties as assigned.
PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- May occasionally be required to work other than normal duty hours; overtime may be required.
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: TSGT
MAXIMUM MILITARY RANK: MSGT
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
SPECIALIZED EXPERIENCE: 1-year specialized experience equivalent to at least the next lower grade. Experience possessed by an expert in specialization able to give technical direction to otherwise competent workers. Experience determining operations when difficult and questionable phases of malfunctions are found. Experience which required significant and concrete work accomplishments (i.e., special projects, working groups, or detailing assignments) involving interpersonal contacts in a quality assurance or related field. Experience in dealing with management principles and supervisory responsibility for the function required by type of position to be filled and the organization involved.
KNOWLEDGE REQUIRED:
--Comprehensive knowledge of assigned aircraft and complex aircraft systems to include but not limited to electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, jet engine propulsion and associated systems, Aerospace Ground Equipment, Support equipment, and related test equipment.
--Knowledge of munitions storage methods, procedures, and techniques to determine storage location based on condition code, compatibility, and security requirements.
--Knowledge of the techniques, documentation, and equipment used in the examination, classification, and maintenance of munitions assets and their components.
--Comprehensive and thorough knowledge of the entire maintenance quality assurance program to include the full range of principles, concepts and methodology and the establishment of procedures for monitoring the quality of products in a maintenance environment.
--Broad knowledge of the practices, policies and procedures of related functional and administrative activities such as Technical Order Distribution Office (TODO), logistics maintenance support functions, contract administration and coordination of CLS or CFT, engineering disposition requests, maintenance production, procurement, supply support, munitions storage etc. and skill in effecting appropriate interface/coordination of quality assurance plans and programs and evaluations with these activities. Broad knowledge of the TCTO and QDR process and the interface/coordination with depot engineering and supply process.
--Thorough knowledge of the Maintenance Standardization Evaluation Program (MSEP).
--Broad knowledge of end items, systems, including quality characteristics and working knowledge of manufacturing methods, special processes and the interrelationship of various parts. Working knowledge of systems, subsystems and end item components and the functional relationships among components and subsystems, and test and measurement techniques.
--Broad knowledge of Higher Headquarters regulations and instructions, PDM work specifications, local directives including Quality Plans, Technical Orders, Military Specifications, and International Commercial Practices such as ISO 9000.
--Comprehensive knowledge of inspection and evaluation techniques, statistical methods, mathematics, production management, industrial management, and database management skills to perform root cause, deficiency, and trend analysis. Analyses are used to validate and update Acceptable Quality Levels (AQLs), frequency changes to Routine Inspection Lists (RILs), and recommendations for corrective maintenance practice action.
--Broad knowledge of the body of laws, regulations, policies and procedures relating to aircraft maintenance, ground, explosive & flight safety, occupational health and environmental compliance. Ability to use this knowledge to develop an evaluation plan and prevention effort to minimize risk and prevent damage to equipment, structures, weapons systems, or injury to personnel.
--Skill in applying this knowledge to the identification of quality problems and resolving the difficult and complex work assignments. Skill to plan and conduct studies, analyze performance and quality data and to develop sound recommendations for correction of quality system deficiencies.
--Ability to conduct technical reviews, analyze findings and develop recommendations for corrections or improvements in the quality assurance program. Ability to prepare technical reports on quality levels, to identify specific problem areas and to recommend corrective action.
--Ability to communicate effectively through written and oral presentations. Skill and ability to work effectively in stressful situations and maintain effective interpersonal relationships at all levels within the organization. Ability to plan and successfully complete individual projects and/or larger projects.
--Skill in using various computer and software applications to include but not limited to: word processing programs, spreadsheets, email services, databases and database management.
Education
SUBSTITUTION OF EDUCATION FOR SPECIALIZED EXPERIENCE:
Ph.D. or equivalent doctoral degree
or
3 full years of progressively higher level graduate education leading to such a degree
or
LL.M., if related
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**
group id: DOAF
