Today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Boise, ID (On-Site/Office)
Duties
1. On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments.
2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives.
3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces.
4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc.
5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained.
Performs other duties as assigned.
Requirements
Conditions of employment
Military Grades: E-1 TO E-5
THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME.
Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experience. Resumes or applications received in verbatim will not be considered.
In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.
The USA Jobs resume builder is recommended to ensure full credit is given for the qualification requirements listed below
GENERAL EXPERIENCE :
Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
SPECIALIZED EXPERIENCE :
WG-12: Experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system. Extensive knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees. Through knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems. Broad knowledge of such applications as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system. Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system. Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays. Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate. Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.
WG-13 and above - Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
Education
There are no educational requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
MORE THAN ONE SELECTION MAY BE MADE FROM THIS ANNOUNCEMENT IF ADDITIONAL IDENTICAL VACANCIES IN THE SAME TITLE, SERIES, GRADE AND UNIT OCCUR.
THE EFFECTIVE/START DATE FOR THIS POSITION WILL BE IAW THE SECRETARY OF DEFENSE GUIDANCE ON THE TITLE 32 DUAL STATUS MILITARY TECHNICIAN HIRING FREEZE EXEMPTION DATED 29 MARCH 2025.
1. On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments.
2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives.
3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces.
4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc.
5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained.
Performs other duties as assigned.
Requirements
Conditions of employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trail period.
- Participation in direct deposit is mandatory.
- Must be able to obtain and maintain a SECRET security clearance.
- Must currently hold and maintain 2A0X1 AFSC.
Military Grades: E-1 TO E-5
THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME.
Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experience. Resumes or applications received in verbatim will not be considered.
In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.
The USA Jobs resume builder is recommended to ensure full credit is given for the qualification requirements listed below
GENERAL EXPERIENCE :
Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
SPECIALIZED EXPERIENCE :
WG-12: Experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system. Extensive knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees. Through knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems. Broad knowledge of such applications as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system. Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system. Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays. Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate. Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.
WG-13 and above - Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
Education
There are no educational requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( ).
MORE THAN ONE SELECTION MAY BE MADE FROM THIS ANNOUNCEMENT IF ADDITIONAL IDENTICAL VACANCIES IN THE SAME TITLE, SERIES, GRADE AND UNIT OCCUR.
THE EFFECTIVE/START DATE FOR THIS POSITION WILL BE IAW THE SECRETARY OF DEFENSE GUIDANCE ON THE TITLE 32 DUAL STATUS MILITARY TECHNICIAN HIRING FREEZE EXEMPTION DATED 29 MARCH 2025.
group id: DOAF
