Today
Secret
Unspecified
Unspecified
AZ (On-Site/Office)
Duties
- Performs a complete range of issuing/receiving duties of assigned tools and equipment.
- Maintains tools and equipment in accordance with applicable directives.
- Performs as primary or alternate custodian for some of the major programs assigned to the support section.
- Prepares and packs tools and equipment for deployments based on mission requirements.
- Utilizes safety practices and procedures following established safety rules and regulations and maintans a safe and clean work environment.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6900 Warehousing And Stock Handling Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of a TOOLS AND PARTS ATTENDANT without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide variety of tools and equipment.
2. Knowledge of safety regulations, practices, and procedures. Ability to communicate effectively, both orally and in writing.
3. Ability to use tools/equipment; store various items; set up and maintain a neat, well organized, and secure storage area; store, issue, and inventory tools and/or equipment; and maintain records using automated and/or mechanized systems without more than normal supervision.
4. Ability to interpret instructions, specifications, etc., from shop personnel and tools and equipment manuals.
5. Ability to inspect tools and equipment for visible damage and make determinations as to feasibility of repair.
6. Ability to suggest substitution of tools and equipment when they are damaged beyond repair; determine causes of overages/shortages; determine need for calibration of tools; and identify items by general descriptions from shop personnel.
PHYSICAL EFFORT: Works on hard surfaces and in work areas that require walking, standing, stooping, bending, and working in tiring and uncomfortable positions. Frequently lifts and carries weights up to 40 pounds. May occasionally handle items weighing up to 60 pounds. May lift heavier items with weight handling equipment or with assistance from other workers.
WORKING CONDITIONS: Work is generally done in areas that are well lighted, heated, and ventilated. The attendant may occasionally work in areas
that are drafty. The work is sometimes dirty, dusty, and greasy. The attendant is frequently exposed to the possibility of cuts, scrapes, and bruises.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
Temporary and Term Appointments: If you are selected for a temporary or term position in the competitive service, your appointment may be extended to the maximum period allowed by law without further competition.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Performs a complete range of issuing/receiving duties of assigned tools and equipment.
- Maintains tools and equipment in accordance with applicable directives.
- Performs as primary or alternate custodian for some of the major programs assigned to the support section.
- Prepares and packs tools and equipment for deployments based on mission requirements.
- Utilizes safety practices and procedures following established safety rules and regulations and maintans a safe and clean work environment.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- All federal employees are required to have direct deposit.
- Shift work may be required.
- The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
- May be required to operate a forklift.
- May be required to build tool/parts kits.
- May be required to travel in support of deployments to various non-hostile locations.
- Performs other related duties as assigned.
- Must be able to obtain and maintain a Secret Clearance.
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program.
- Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
- This is a TERM position NTE 1 YR from EOD.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6900 Warehousing And Stock Handling Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of a TOOLS AND PARTS ATTENDANT without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide variety of tools and equipment.
2. Knowledge of safety regulations, practices, and procedures. Ability to communicate effectively, both orally and in writing.
3. Ability to use tools/equipment; store various items; set up and maintain a neat, well organized, and secure storage area; store, issue, and inventory tools and/or equipment; and maintain records using automated and/or mechanized systems without more than normal supervision.
4. Ability to interpret instructions, specifications, etc., from shop personnel and tools and equipment manuals.
5. Ability to inspect tools and equipment for visible damage and make determinations as to feasibility of repair.
6. Ability to suggest substitution of tools and equipment when they are damaged beyond repair; determine causes of overages/shortages; determine need for calibration of tools; and identify items by general descriptions from shop personnel.
PHYSICAL EFFORT: Works on hard surfaces and in work areas that require walking, standing, stooping, bending, and working in tiring and uncomfortable positions. Frequently lifts and carries weights up to 40 pounds. May occasionally handle items weighing up to 60 pounds. May lift heavier items with weight handling equipment or with assistance from other workers.
WORKING CONDITIONS: Work is generally done in areas that are well lighted, heated, and ventilated. The attendant may occasionally work in areas
that are drafty. The work is sometimes dirty, dusty, and greasy. The attendant is frequently exposed to the possibility of cuts, scrapes, and bruises.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
Temporary and Term Appointments: If you are selected for a temporary or term position in the competitive service, your appointment may be extended to the maximum period allowed by law without further competition.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
