Today
Secret
Unspecified
Unspecified
Altus, OK (On-Site/Office)
Duties
- Uses a variety of welding processes such as oxyacetylene, electrode arc, submerged arc, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding, metal spray arc, and spot and stud welding to join all types of common metals and alloys.
- Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders. Sets up clamping fixtures. Devises special jigs and fixtures to hold the parts to be welded, as needed. Prepares welding surfaces.
- Utilizes safety practices, established rules, regulations, and procedures. Maintains safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing.
- Uses and maintains tools. Services, performs minor maintenance and operates shop equipment plus uses both powered and non-powered hand tools in accomplishing assignments.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-3700 Metal Processing Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is ability to do the work of a WELDER without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of welding principles, processes, and difficult techniques; and of welding standards and how various metals and metal alloys react to different welding processes and techniques.
2. Knowledge of safety regulations, practices, and procedures.
3. Skill in using and maintaining hand tools, power tools, and special jigs and fixtures.
4. Ability to weld dissimilar metals including aircraft, AGE and non-aircraft parts and structures that vary in size, shape, and thickness.
5. Ability to use measuring instruments to maintain dimensions and tolerances to specifications.
6. Ability to use welding drawings, blueprints, specifications, and instructions.
Physical Effort:
Employee must stand, stoop, bend, kneel, climb, crawl, stretch, and work in awkward and cramped positions when welding in hard-to- reach or confined spaces. Frequently handles objects weighing up to 50 pounds without assistance and over 50 pounds with assistance.
Working Conditions:
Employee works inside and outside, sometimes in bad weather and in areas that are noisy, dirty, greasy, and smoky. Is exposed to fumes, heat, flying sparks, the glare of torches, ultraviolet radiation, and heated materials. There is the possibility of eye injury, electrical shock, broken bones, burns, and the chance of cuts when working with sharp objects. There may be discomfort when wearing protective clothing, safety shoes, gloves, flash shield or eye goggles, and other equipment as required.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Uses a variety of welding processes such as oxyacetylene, electrode arc, submerged arc, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding, metal spray arc, and spot and stud welding to join all types of common metals and alloys.
- Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders. Sets up clamping fixtures. Devises special jigs and fixtures to hold the parts to be welded, as needed. Prepares welding surfaces.
- Utilizes safety practices, established rules, regulations, and procedures. Maintains safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing.
- Uses and maintains tools. Services, performs minor maintenance and operates shop equipment plus uses both powered and non-powered hand tools in accomplishing assignments.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Direct Deposit: All federal employees are required to have direct deposit.
- Recall to duty may be a requirement of this position.
- The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
- The employee may be required to maintain current certification to perform various types of welding work. Welding proficiency is verified by destructive and nondestructive testing of welds.
- Subject to work uncommon tours of duty and shift work.
- Access may be required to information or areas classified up to SECRET.
- Performs other related duties as assigned.
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
- This position has a limited area of consideration to command-wide (AETC) only.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-3700 Metal Processing Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is ability to do the work of a WELDER without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of welding principles, processes, and difficult techniques; and of welding standards and how various metals and metal alloys react to different welding processes and techniques.
2. Knowledge of safety regulations, practices, and procedures.
3. Skill in using and maintaining hand tools, power tools, and special jigs and fixtures.
4. Ability to weld dissimilar metals including aircraft, AGE and non-aircraft parts and structures that vary in size, shape, and thickness.
5. Ability to use measuring instruments to maintain dimensions and tolerances to specifications.
6. Ability to use welding drawings, blueprints, specifications, and instructions.
Physical Effort:
Employee must stand, stoop, bend, kneel, climb, crawl, stretch, and work in awkward and cramped positions when welding in hard-to- reach or confined spaces. Frequently handles objects weighing up to 50 pounds without assistance and over 50 pounds with assistance.
Working Conditions:
Employee works inside and outside, sometimes in bad weather and in areas that are noisy, dirty, greasy, and smoky. Is exposed to fumes, heat, flying sparks, the glare of torches, ultraviolet radiation, and heated materials. There is the possibility of eye injury, electrical shock, broken bones, burns, and the chance of cuts when working with sharp objects. There may be discomfort when wearing protective clothing, safety shoes, gloves, flash shield or eye goggles, and other equipment as required.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF
