Today
Secret
Unspecified
Unspecified
Construction/Facilities
Altus, OK (On-Site/Office)
Duties
- Performs work planning responsibilities.
- Performs work direction responsibilities
- Performs administration responsibilities.
- Provides a work environment that is free from all forms of discrimination, harassment, and retaliation.
- Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas.
- Troubleshoots, repairs, overhauls, and modifies support equipment.
Requirements
Conditions of employment
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WS-5300 Industrial Equipment Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an POWERED SUPPORT SYSTEMS MECHANIC SUPERVISOR without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of principles, processes, and techniques of trade(s) and/or craft(s) supervised and personnel management policies, practices, and procedures, including sexual harassment and Equal Employment Opportunity/ Equal Employment Treatment.
2. Knowledge of safety regulations, practices, and procedures.
3. Skill in the use and maintenance of hand and power tools, equipment, and precision measuring and/or test equipment common to trades supervised.
4. Ability to read and interpret blueprints, diagrams, sketches, and technical specifications.
5. Ability to plan and organize work assignments to include determining resources required to accomplish mission.
6. Ability to communicate effectively, both orally and in writing.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
- Performs work planning responsibilities.
- Performs work direction responsibilities
- Performs administration responsibilities.
- Provides a work environment that is free from all forms of discrimination, harassment, and retaliation.
- Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas.
- Troubleshoots, repairs, overhauls, and modifies support equipment.
Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- This posn is subject to provisions of the DoD Priority Placement Program
- Disclosure of Political Appointments
- Direct Deposit: All federal employees are required to have direct deposit.
- The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays. Shift work may be required. Emergency overtime may be required. Subject to call during non-duty hours.
- Work requires access to classified information. Employee must be able to obtain and maintain a secret security clearance.
- Performs work that involves frequent bending, reaching, crouching, standing, and arm movement. Sometimes must work in awkward positions or cramped areas. Must frequently lift and carry items weighing up to about 40 pounds.
- However, when lifting of heavier items over 18 kilograms (40 pounds), they will use jacks, hoists, and/or helpers.
- The working conditions of this position are: May work inside or outside. Inside work involves frequent exposure to drafts, changing temperature, and loud noise. Outside work may involve exposure to bad weather, rain, snow, wet or icy conditions.
- Both inside and outside frequently exposed to irritation or discomfort from dust, heat, fumes, and hard damp floors or surfaces. May work on parts and systems which are dirty and greasy, and which may be dangerous
- to operate or repair because of defects. Incumbent is frequently exposed to the possibility of receiving cuts, burns, bruises, strains, and electrical shock while repairing, positioning, adjusting, and moving equipment and is exposed
- to the possibility of receiving burns and skin irritations from acids, fluids, and lubricants. To reduce the dangers and irritations from the above conditions, the incumbent must follow numerous safety procedures and wear equipment
- such as protective eyeglasses, ear devices, hard hats, hard-toe shoes, respirators, gloves, and clothing. Some of these safety items may be uncomfortable to wear or use and may be worn or used for long periods.
- The duties of this position requires the employee to operate a motor vehicle. An appropriate, valid driver's license is required.
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety. Incumbent of this position is subject to the possibility of a random drug test.
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WS-5300 Industrial Equipment Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to do the work of an POWERED SUPPORT SYSTEMS MECHANIC SUPERVISOR without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of principles, processes, and techniques of trade(s) and/or craft(s) supervised and personnel management policies, practices, and procedures, including sexual harassment and Equal Employment Opportunity/ Equal Employment Treatment.
2. Knowledge of safety regulations, practices, and procedures.
3. Skill in the use and maintenance of hand and power tools, equipment, and precision measuring and/or test equipment common to trades supervised.
4. Ability to read and interpret blueprints, diagrams, sketches, and technical specifications.
5. Ability to plan and organize work assignments to include determining resources required to accomplish mission.
6. Ability to communicate effectively, both orally and in writing.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click .
If you have questions regarding this announcement and have hearing or speech difficulties click .
group id: DOAF