Today
Secret
Unspecified
Unspecified
Newport, RI (On-Site/Office)
Duties
Requirements
Conditions of employment
Qualifications
This is an interdisciplinary position and may be filled by a General Engineer (0801 series), Mathematician (1520 series), or a Computer Scientist (1550-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 1520, and 1550) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.
TO QUALIFY FOR THE ND-05 MANAGER POSITION:
Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-04 (GS-12/13) pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist spearheading multi-disciplinary projects, systems development efforts, research, or technology initiatives for the refinement of combat systems and platform/payload integration frameworks to optimize operational performance.
TO QUALIFY FOR THE ND-04 SUPERVISORY ENGINEER OR SUPERVISORY SCIENTIST POSITION:
Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-03 (GS-9-11) pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer or scientist, overseeing the implementation of systems engineering principles in the design and integration of combat systems and platform/payload technologies, managing a team to optimize operational performance.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:
FOR THE 0801 - Professional Engineering Series:
A. Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
B. Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
C. Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:
OR
D. Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORE. Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOR THE 1520 - Mathematics Series: A degree in mathematics or the equivalent of a major that included at least 24 semester hours in mathematics; or, a combination of education and experience demonstrated by courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics, plus appropriate experience or additional education.
FOR THE 1550 - Computer Science Series: A degree in computer science or degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours were in a combination of statistics and mathematics that included differential and integral calculus.
Additional information
This position is part of the Warfare Centers Personnel Demonstration Project. The ND-5 pay band is equivalent to GS-14 and GS-15 grade levels. The ND-4 pay band is equivalent to GS-12 and GS-13 grade levels.
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
- You will be responsible for the administrative and technical supervision of a medium size workforce consisting of ND and NT employees of various engineering, scientific, and technical backgrounds.
- You will need to have general multi-disciplinary knowledge in the areas of mechanical and systems engineering to manage employees performing the work of the branch.
- You will plan, establish, direct and maintain the effectiveness and safety of personnel and facilities.
- You will provide technical and management oversight and day-to-day supervision of employees to ensure delivery and quality of products assigned to their organization.
- You will ensure that technical and business processes within their branch are operating effectively and address any issues as they arise.
- You will perform workforce-to-workload assessments to identify technical skill short falls and skill imbalances to be addressed via personnel development, department hiring and/or contract actions.
- You will develop a skilled workforce by the creation of individual development and career plans, training opportunities, and employee mentoring.
- You will lead Department strategic initiatives and support Division Newport Strategic initiatives.
- You will be assigned financial procurement authority, authority to approve official time and authority to approve travel authorizations and vouchers.
- You will provide technical expertise, software engineering, system engineering and program management, over the full spectrum of assigned projects.
- You will provide the technical expertise and software engineering competency spans the NUWCDIVNPT "bridge" from science and technology, product and systems development, production and acquisition, test/evaluation, and direct Fleet in-service support.
Requirements
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- 1550 is a Cyberspace Workforce position, work role code Program Manager, proficiency level advanced the incumbent is required to obtain and maintain qualifications in DoDM 8140.03 Cyber Workforce Qualification and Dept. of Navy policies.
Qualifications
This is an interdisciplinary position and may be filled by a General Engineer (0801 series), Mathematician (1520 series), or a Computer Scientist (1550-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 1520, and 1550) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.
TO QUALIFY FOR THE ND-05 MANAGER POSITION:
Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-04 (GS-12/13) pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist spearheading multi-disciplinary projects, systems development efforts, research, or technology initiatives for the refinement of combat systems and platform/payload integration frameworks to optimize operational performance.
TO QUALIFY FOR THE ND-04 SUPERVISORY ENGINEER OR SUPERVISORY SCIENTIST POSITION:
Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-03 (GS-9-11) pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer or scientist, overseeing the implementation of systems engineering principles in the design and integration of combat systems and platform/payload technologies, managing a team to optimize operational performance.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:
FOR THE 0801 - Professional Engineering Series:
A. Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
B. Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
C. Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:
OR
D. Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORE. Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOR THE 1520 - Mathematics Series: A degree in mathematics or the equivalent of a major that included at least 24 semester hours in mathematics; or, a combination of education and experience demonstrated by courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics, plus appropriate experience or additional education.
FOR THE 1550 - Computer Science Series: A degree in computer science or degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours were in a combination of statistics and mathematics that included differential and integral calculus.
Additional information
This position is part of the Warfare Centers Personnel Demonstration Project. The ND-5 pay band is equivalent to GS-14 and GS-15 grade levels. The ND-4 pay band is equivalent to GS-12 and GS-13 grade levels.
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
group id: DON
