Today
Secret
Unspecified
Unspecified
Engineering - Mechanical
Australia (On-Site/Office)
Duties
Help
Requirements
Help
Conditions of employment
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the next lower grade level GS-11 or pay band in the federal service or equivalent experience in the private or public sector as a professional Mechanical Engineer in 1) Conducting studies and analysis of industry or new engineering principles for surface ship/submarine mechanical systems for all non-nuclear systems repair methods, 2) Development of training programs to support non-nuclear surface ship/submarine systems components, 3) Technical advisor and ship platform subject expert on installations, or testing phases of waterfront efforts, and 4) Application of engineering principals and analysis in the troubleshooting and repair of ship system and components.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series
all-professional-engineering-positions-0800.pdf (opm.gov)
https://www.cpf.navy.mil/About-Us/Organization/Total-Fleet-Force-Manpower-Personnel/Equal-Employment-Opportunity-Program/
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
The President has ordered a government-wide hiring freeze subject to certain limited exceptions. This position is subject to the hiring freeze. Although we are moving forward with the consideration of candidates, we will not make a selection for this vacancy announcement unless and until the position is no longer subject to the hiring freeze.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
ADDITIONAL INFORMATION
Priority consideration will be given to military spouse preference and family member preference eligible residing in the commute area of the duty location for this position. Commute area is defined as the geographic area surrounding the duty location in which people can reasonably be expected to travel back and forth daily.
Military Spouses and Family Members may apply 30 days before their anticipated arrival date. However, they will not receive preference until arrival at the foreign location. Additional documentation may be required prior to granting preference.
Military spouses and family members who are appointed may not extend longer than 2 months following the transfer of the sponsor from the commuting area of the foreign duty station; 2 months beyond the separation of the appointee's sponsor; or any time beyond the time employee ceases to be a family member.
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Additional information
***Upon relocation to Australia, employee pay will be based upon the final post of duty to which the employee is assigned in Australia. Employees directed to a foreign post of duty in Australia may be authorized overseas allowances in accordance with the Department of State Standardized Regulation to include foreign transfer allowance, temporary quarters allowance, living quarters allowance and other allowances to which they are eligible.***
Employees (and their family members) who require medical care in Australia may experience limitations accessing medical care both on the military installation and the local economy, and could incur costly medical expenses. Please consult Overseas Living and Working Conditionspublished here for Rockingham and Garden Island WesternAustralia: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx
This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs.
Additional vacancies may be filled by this announcement.
Pay retention may be granted when certain conditions are met.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
Tour of duty will be 36 months.
To learn more about the living and working conditions at this military installation and additional Foreign Overseas information, please go to: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx
Help
- You will provide technical direction for mechanical engineering requirements on surface ship/submarine mechanical systems for all non-nuclear support work.
- You will conduct independent and collaborative engineering studies, investigations, and analysis using industry or new engineering principles
- You will serve as technical advisor and ship platform subject matter expert.
- You will advise in the identification and resolution of problems encountered during installation, grooming, or testing phases
- You will provide worldwide Fleet Technical Support (FTS) for our surface/submarine fleet in the form of inspections/assessments, analysis, repair recommendations and technical adjudication
- You will support the Command in the event of a major Incident on an assigned ship and help coordinate the necessary PHNSY and IMF AUKUS technical response.
Requirements
Help
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
- This is an overseas position. You will be subject to and must be able to satisfy the overseas requirements of the 26Jul12 DODI 1400.25 V1230: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/140025v1230.pdf
- This position may require travel to places within and outside the contiguous United States which could include remote or isolated sites. You may be required to travel on military and commercial aircraft for extended periods of time.
- If eligible for permanent change of station, the appointee will be required to sign a transportation agreement to establish a Government time in service requirement of 12 months.
- Must be able to obtain and maintain a U.S. Passport.
- May be required to obtain a VISA dependent on the overseas country's laws/regulations.
- You will be required to sign the Statement of Understanding for Overseas Employment acknowledging receipt and understanding of the statement of living and working conditions for this location.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to successfully complete a pre-appointment physical examination.
- You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
- This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the next lower grade level GS-11 or pay band in the federal service or equivalent experience in the private or public sector as a professional Mechanical Engineer in 1) Conducting studies and analysis of industry or new engineering principles for surface ship/submarine mechanical systems for all non-nuclear systems repair methods, 2) Development of training programs to support non-nuclear surface ship/submarine systems components, 3) Technical advisor and ship platform subject expert on installations, or testing phases of waterfront efforts, and 4) Application of engineering principals and analysis in the troubleshooting and repair of ship system and components.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series
all-professional-engineering-positions-0800.pdf (opm.gov)
https://www.cpf.navy.mil/About-Us/Organization/Total-Fleet-Force-Manpower-Personnel/Equal-Employment-Opportunity-Program/
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
The President has ordered a government-wide hiring freeze subject to certain limited exceptions. This position is subject to the hiring freeze. Although we are moving forward with the consideration of candidates, we will not make a selection for this vacancy announcement unless and until the position is no longer subject to the hiring freeze.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
ADDITIONAL INFORMATION
Priority consideration will be given to military spouse preference and family member preference eligible residing in the commute area of the duty location for this position. Commute area is defined as the geographic area surrounding the duty location in which people can reasonably be expected to travel back and forth daily.
Military Spouses and Family Members may apply 30 days before their anticipated arrival date. However, they will not receive preference until arrival at the foreign location. Additional documentation may be required prior to granting preference.
Military spouses and family members who are appointed may not extend longer than 2 months following the transfer of the sponsor from the commuting area of the foreign duty station; 2 months beyond the separation of the appointee's sponsor; or any time beyond the time employee ceases to be a family member.
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Additional information
***Upon relocation to Australia, employee pay will be based upon the final post of duty to which the employee is assigned in Australia. Employees directed to a foreign post of duty in Australia may be authorized overseas allowances in accordance with the Department of State Standardized Regulation to include foreign transfer allowance, temporary quarters allowance, living quarters allowance and other allowances to which they are eligible.***
Employees (and their family members) who require medical care in Australia may experience limitations accessing medical care both on the military installation and the local economy, and could incur costly medical expenses. Please consult Overseas Living and Working Conditionspublished here for Rockingham and Garden Island WesternAustralia: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx
This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs.
Additional vacancies may be filled by this announcement.
Pay retention may be granted when certain conditions are met.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
Tour of duty will be 36 months.
To learn more about the living and working conditions at this military installation and additional Foreign Overseas information, please go to: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx
group id: DODAF
