Today
Secret
Unspecified
Unspecified
Engineering - Electrical
Woodland Hills, CA (On-Site/Office)
Job Description:
TELECOMMUTE: No- Teleworking not available for this position
CLEARANCE TYPE: Secret
WORK SHIFT: 1st Shift (9/80A)
TRAVEL: 5% for Test Support
*** Mission Systems is a trusted provider of mission-enabling solutions for global security. Our Engineering and Sciences (E&S) organization pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. Our team is chartered with providing the skills, innovative technologies to develop, design, produce and sustain optimized product lines across the sector while providing a decisive advantage to the warfighter. Come be a part of our mission!
We are looking for you to join our team as an EMI/EMC Electrical Engineer based out of Woodland Hills, CA. As Power Electronics Design Engineer at *** you will have a challenging and rewarding opportunity to be a part of our Enterprise-wide digital transformation. Through the use of Model-based Engineering, DevSecOps and Agile practices we continue to evolve how we deliver critical national defense products and capabilities for the warfighter. Our success is grounded in our ability to embrace change, move quickly and continuously drive innovation. The successful candidate will be collaborative, open, transparent, and team-oriented with a focus on team empowerment & shared responsibility, flexibility, continuous learning, and a culture of automation.
This requisition may be filled at a higher grade based on qualifications listed below
This requisition may be filled at either the Principal or Sr. Principal Level.
What You'll get to Do:
This is a mid-level position for an electrical engineer experienced in hardware design and design analysis and with background in EMI/EMC engineering. The selected candidate will perform electrical circuit analysis, test and troubleshooting. In addition, the selected candidate will support development of EMI/EMC requirements, EMI/EMC hardware design requirements at sub-system level and will perform design analysis to verify compliance.
Basic Qualifications for a Principal EMI/EMC Electrical Engineer:
• 5 years of experience with a Bachelor of Science in Electrical Engineering; 3 years' experience with Masters
• Electronic hardware design experience
• Knowledge of MIL-STD 461 and MIL-STD 464 and DO-160
• Knowledge of EMI/EMC design.
• Experience with modeling and simulation using PSPICE
• Able to obtain/maintain a DoD Secret Clearance
Basic Qualifications for a Sr. Principal EMI/EMC Electrical Engineer:
• 8 years of experience with a Bachelor of Science in Electrical Engineering; 6 years' experience with Masters, 4 years' experience with a PhD
• Electronic hardware design experience
• Knowledge of MIL-STD 461 and MIL-STD 464 and DO-160
• Knowledge of EMI/EMC simulation, modeling, and testing.
• Experience with modeling and simulation using PSPICE
• Able to obtain/maintain a DoD Secret Clearance
Preferred Qualifications
• M.S. in Electrical Engineering
• Proficiency in using CST CAE tools
• Experience with EMP simulation, modeling, and testing.
• Experience in Signal Integrity analysis, working knowledge in using Cadence Signal Integrity analysis tool or Siemens HyperLynx high-speed analysis tools.
• Experience with sub-system and system level EMI/EMC testing
• Knowledge of circuit simulation and modeling using Ansys EMC Plus
Thank You,
Ibad Ahmed
Associate Recruiter
Direct: 973-500-2105
Email: ibad.ahmed@Artech.com
360 Mt. Kemble Avenue Suite 2000, Morristown, NJ 07960
Website: www.artech.com
LinkedIn: https://www.linkedin.com/in/ibad-ahmed-88b055121/
TELECOMMUTE: No- Teleworking not available for this position
CLEARANCE TYPE: Secret
WORK SHIFT: 1st Shift (9/80A)
TRAVEL: 5% for Test Support
*** Mission Systems is a trusted provider of mission-enabling solutions for global security. Our Engineering and Sciences (E&S) organization pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. Our team is chartered with providing the skills, innovative technologies to develop, design, produce and sustain optimized product lines across the sector while providing a decisive advantage to the warfighter. Come be a part of our mission!
We are looking for you to join our team as an EMI/EMC Electrical Engineer based out of Woodland Hills, CA. As Power Electronics Design Engineer at *** you will have a challenging and rewarding opportunity to be a part of our Enterprise-wide digital transformation. Through the use of Model-based Engineering, DevSecOps and Agile practices we continue to evolve how we deliver critical national defense products and capabilities for the warfighter. Our success is grounded in our ability to embrace change, move quickly and continuously drive innovation. The successful candidate will be collaborative, open, transparent, and team-oriented with a focus on team empowerment & shared responsibility, flexibility, continuous learning, and a culture of automation.
This requisition may be filled at a higher grade based on qualifications listed below
This requisition may be filled at either the Principal or Sr. Principal Level.
What You'll get to Do:
This is a mid-level position for an electrical engineer experienced in hardware design and design analysis and with background in EMI/EMC engineering. The selected candidate will perform electrical circuit analysis, test and troubleshooting. In addition, the selected candidate will support development of EMI/EMC requirements, EMI/EMC hardware design requirements at sub-system level and will perform design analysis to verify compliance.
Basic Qualifications for a Principal EMI/EMC Electrical Engineer:
• 5 years of experience with a Bachelor of Science in Electrical Engineering; 3 years' experience with Masters
• Electronic hardware design experience
• Knowledge of MIL-STD 461 and MIL-STD 464 and DO-160
• Knowledge of EMI/EMC design.
• Experience with modeling and simulation using PSPICE
• Able to obtain/maintain a DoD Secret Clearance
Basic Qualifications for a Sr. Principal EMI/EMC Electrical Engineer:
• 8 years of experience with a Bachelor of Science in Electrical Engineering; 6 years' experience with Masters, 4 years' experience with a PhD
• Electronic hardware design experience
• Knowledge of MIL-STD 461 and MIL-STD 464 and DO-160
• Knowledge of EMI/EMC simulation, modeling, and testing.
• Experience with modeling and simulation using PSPICE
• Able to obtain/maintain a DoD Secret Clearance
Preferred Qualifications
• M.S. in Electrical Engineering
• Proficiency in using CST CAE tools
• Experience with EMP simulation, modeling, and testing.
• Experience in Signal Integrity analysis, working knowledge in using Cadence Signal Integrity analysis tool or Siemens HyperLynx high-speed analysis tools.
• Experience with sub-system and system level EMI/EMC testing
• Knowledge of circuit simulation and modeling using Ansys EMC Plus
Thank You,
Ibad Ahmed
Associate Recruiter
Direct: 973-500-2105
Email: ibad.ahmed@Artech.com
360 Mt. Kemble Avenue Suite 2000, Morristown, NJ 07960
Website: www.artech.com
LinkedIn: https://www.linkedin.com/in/ibad-ahmed-88b055121/
group id: artech
