Yesterday
Secret
Unspecified
Unspecified
IT - Hardware
South Burlington, VT (On-Site/Office)
Duties
MAJOR DUTIES:
Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs.
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned. Advises Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Interacts directly with aircrews for mission/sortie debrief and enhanced system troubleshooting.
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers.
**REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES
Requirements
Conditions of Employment
Minimum Requirements - Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
Specialized Experience -36 Months Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
Quality of Experience: Qualification factors include education and competencies in performing work on integrated systems. Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's resume package should include any military service experiences and relative civilian experiences in multiple-system avionics complexes consisting of integrated electronic avionics where the results and support accomplished major functions. Also, the applicants should provide any awarded maintenance certifications, military and/or civilian performance reports; related training certificates; and/or official college transcripts that support the Series' integrated systems work. The applicants' resumes must clearly demonstrate possession of the knowledge, skills and abilities needed to fully perform the duties of the position.
Your qualifications will be evaluated on the following knowledge, skills, abilities and other characteristics:
--Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system.
-- Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies.
-- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas.
-- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well.
-- Knowledge and ability to perform complex mathematics including algebra and trigonometric formulas to calculate power relationships, signal phasing, etc., and to solve work related problems.
-- Ability to accurately identify, isolate, repair, align, and adjust complete multi-system complex malfunctions of the aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops.
-- Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops.
-- Ability to isolate malfunctions of complete multiple integrated system complexes consisting of closely interrelated integrated and non-integrated systems.
-- Skill in the set up and operation of computer controlled test equipment such as Portable Automated Test Station (PATS), Joint Service Electronic Combat System Tester (JSECST),test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete multi-system complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multi-system complex; and in troubleshooting, installing, repairing, and maintaining electronic integrated multi-systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions.
-- Working knowledge of the Technical Order system and other technical publications and directives relating to the section. Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques.
Education
There are no specific educational requirements for this position.
Additional information
OPEN AREAS OF CONSIDERATION: AREA 1, 2
Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area II: All Members of the Vermont Air National Guard.
Military Grade/Rank: Individually considered up to MSgt/E7
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
OTHER CONDITIONS OF EMPLOYMENT & NOTES :
-This position is subject to the Lautenberg amendment to the gun control act of 1968 which makes it a felony for anyone who has been convicted of a misdemeanor crime of domestic violence to ship, transport, possess, or receive firearms or ammunition. Civilian personnel of the Department of the Defense are not exempt from this provision. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
-For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.
-For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
Vermont Air National Guard personnel who are bonus recipients/student loan repayment program recipients may have their benefits terminated and/or recouped if selected as a Permanent/Indefinite Military Technician. Applicants should contact the VTANG Incentive Manager at 802-660-5211 to determine any possible termination and/or recoupment actions that may result from accepting this position.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Please be advised that the applicant rating will be evaluated on the following occupational competencies:
1. Teamwork
2. Decision Making
3. Self-Management
4. Aircraft Maintenance
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: Must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. AGO-VT Form 690-5, Military Experience and Education Resume:
All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form.
Other supporting documents (as applicable):
- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.
In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
If you are using education to qualify for this position OR education is a mandatory requirement to meet qualifications, YOU MUST submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Nathan Brimmer
Phone (802)338-3634 Email nathan.m.brimmer.civ@army.mil
Address 158th Aircraft Maintenance Squadron Command
112 NCO Drive
South Burlington, VT 05403
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
MAJOR DUTIES:
Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs.
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned. Advises Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Interacts directly with aircrews for mission/sortie debrief and enhanced system troubleshooting.
3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers.
**REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES
Requirements
Conditions of Employment
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- May occasionally be directed to work other than normal duty hours.
- This position may be designated mission essential based on local conditions. Mission essential personnel report for duty at normal times when the unit is closed or delayed reporting and remain on duty during phased or early release.
- May require travel in military and/or commercial aircraft to perform temporary duty assignments.
- The work may require the incumbent to drive a motor vehicle; if so, an appropriate valid driver's license is mandatory.
- The position is designated for drug testing.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment
- Participation in direct deposit is mandatory.
- In order to be eligible, applicants must have a current military status. Prior service or non-prior service applicants are not eligible.
Minimum Requirements - Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
Specialized Experience -36 Months Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
Quality of Experience: Qualification factors include education and competencies in performing work on integrated systems. Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's resume package should include any military service experiences and relative civilian experiences in multiple-system avionics complexes consisting of integrated electronic avionics where the results and support accomplished major functions. Also, the applicants should provide any awarded maintenance certifications, military and/or civilian performance reports; related training certificates; and/or official college transcripts that support the Series' integrated systems work. The applicants' resumes must clearly demonstrate possession of the knowledge, skills and abilities needed to fully perform the duties of the position.
Your qualifications will be evaluated on the following knowledge, skills, abilities and other characteristics:
--Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system.
-- Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies.
-- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas.
-- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well.
-- Knowledge and ability to perform complex mathematics including algebra and trigonometric formulas to calculate power relationships, signal phasing, etc., and to solve work related problems.
-- Ability to accurately identify, isolate, repair, align, and adjust complete multi-system complex malfunctions of the aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops.
-- Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops.
-- Ability to isolate malfunctions of complete multiple integrated system complexes consisting of closely interrelated integrated and non-integrated systems.
-- Skill in the set up and operation of computer controlled test equipment such as Portable Automated Test Station (PATS), Joint Service Electronic Combat System Tester (JSECST),test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete multi-system complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multi-system complex; and in troubleshooting, installing, repairing, and maintaining electronic integrated multi-systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions.
-- Working knowledge of the Technical Order system and other technical publications and directives relating to the section. Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques.
Education
There are no specific educational requirements for this position.
Additional information
OPEN AREAS OF CONSIDERATION: AREA 1, 2
Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area II: All Members of the Vermont Air National Guard.
Military Grade/Rank: Individually considered up to MSgt/E7
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
OTHER CONDITIONS OF EMPLOYMENT & NOTES :
-This position is subject to the Lautenberg amendment to the gun control act of 1968 which makes it a felony for anyone who has been convicted of a misdemeanor crime of domestic violence to ship, transport, possess, or receive firearms or ammunition. Civilian personnel of the Department of the Defense are not exempt from this provision. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
-For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.
-For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
Vermont Air National Guard personnel who are bonus recipients/student loan repayment program recipients may have their benefits terminated and/or recouped if selected as a Permanent/Indefinite Military Technician. Applicants should contact the VTANG Incentive Manager at 802-660-5211 to determine any possible termination and/or recoupment actions that may result from accepting this position.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Please be advised that the applicant rating will be evaluated on the following occupational competencies:
1. Teamwork
2. Decision Making
3. Self-Management
4. Aircraft Maintenance
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: Must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. AGO-VT Form 690-5, Military Experience and Education Resume:
All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form.
Other supporting documents (as applicable):- For current Federal employees:Latest SF 50, Personnel Action.
- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.
In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
If you are using education to qualify for this position OR education is a mandatory requirement to meet qualifications, YOU MUST submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Nathan Brimmer
Phone (802)338-3634 Email nathan.m.brimmer.civ@army.mil
Address 158th Aircraft Maintenance Squadron Command
112 NCO Drive
South Burlington, VT 05403
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
To apply for this position, you must submit a complete Application Package which includes:
1. Resume: Must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. AGO-VT Form 690-5, Military Experience and Education Resume:
All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form.
Other supporting documents (as applicable):
- For current Federal employees:Latest SF 50, Personnel Action.
- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.
In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
If you are using education to qualify for this position OR education is a mandatory requirement to meet qualifications, YOU MUST submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Nathan Brimmer
Phone (802)338-3634 Email nathan.m.brimmer.civ@army.mil
Address 158th Aircraft Maintenance Squadron Command
112 NCO Drive
South Burlington, VT 05403
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOAF
