Yesterday
Secret
Unspecified
Unspecified
IT - Hardware
Fresno, CA (On-Site/Office)
Duties
THIS IS A T32 EXCEPTED SERVICE, PERMANENT POSITION
The primary purpose of the ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions.
May make additional selections within 90 days of eligible(s) issuance.
Requirements
Conditions of Employment
CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://ca.nationalguard.com/california
Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position.
Compatible Military Assignments Primary and Duty AFSCs with the annotated skill level required prior to appointment:
WG-12: 2A051, 2A031, 2A251, 2A231, 2A252, 2A232, 2A253, 2A233, 2A354, 2A334, 2A355, 2A335, 2A851, 2A831, 2A852, 2A832, 2A951, 2A931, 2A952, 2A932, 2A953, 2A933
WG-13: 2A071, 2A271, 2A272, 2A273, 2A374, 2A375, 2A871, 2A872, 2A971, 2A972, 2A973
Non-PAFSC/DAFSC applicants are encouraged to apply for the positions if experience is held, however must become compatible before appointment.
Priority Areas(s) of Consideration:
Priority consideration is first given to the areas below.
AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment.
AREA II= Current California National Guard members.
AREA III= Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment).
Military Grades: E-2 through E-6
Must maintain appropriate level of secret security clearance.
Must wear appropriate military uniform including required grooming standards.
Must maintain a compatible military unit, grade and job assignment as required by current directives.
Participation in direct deposit is mandatory.
Qualifications
General Experience: Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes; Ability to collect and analyze data effectively, efficiently, and accurately; Able to apply procedures and directives by reading and interpreting material; Ability to communicate clearly and effectively; Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12: Must have at least 18 months of experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system; Knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees; Knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems; Knowledge of applications such as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system; Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system; Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays; Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.
ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13: Must have at least 18 months experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops; Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications; Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction; Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications; Broad knowledge of the interactions among a number of closely integrated complex systems; Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc; Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex; Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units; Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
TRAINEE POSITION: Applicants not meeting full qualifications for the WG-13 position indicated above may be considered for WG-12 trainee, if qualified. Statement-of-Difference of qualification requirements for each are indicated. If appointed as trainee, the selectee may be non-competitively promoted to WG-13 upon meeting full qualifications and recommendations of supervisor.
Your qualifications will be evaluated on the following competencies:
Military education requirements are mandatory prior to appointment. Completion of compatible Avionics Air Force Technical Training School required.
Must have been awarded a compatible primary and duty AFSC prior to appointment.
WG-13: Must have a successful completion of at least one military professional education course program.
Additional information
Recruitment/Relocation
Recruitment/Relocation Incentive IS NOT authorized.
PCS
Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest.
MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
If you are unable to apply online or need to fax a document you do not have in electronic form, please email ng.ca.caarng.list.j1-hro-recruitfedjobs-usas@army.mil or Fax to 916-854-3439.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (month/year to month/year or present) of employment and duties performed.
2. Other supporting documents: applicable documents required for qualification, education, or certification as stated above.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section above.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. No changes to the application may be made after the close date of the announcement.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
California National Guard HRO
Email NG.CA.CAARNG.LIST.J1-HRO-RECRUITFEDJOBS-USAS@ARMY.MIL
Address CA 144 FW
144th
Fresno, CA 93727
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
If you do not receive an email that your application has been received, make sure the application was correctly submitted.
False Statements - If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or you may be subject to fine, imprisonment, or other disciplinary action.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
THIS IS A T32 EXCEPTED SERVICE, PERMANENT POSITION
The primary purpose of the ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions.
May make additional selections within 90 days of eligible(s) issuance.
Requirements
Conditions of Employment
CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://ca.nationalguard.com/california
Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position.
Compatible Military Assignments Primary and Duty AFSCs with the annotated skill level required prior to appointment:
WG-12: 2A051, 2A031, 2A251, 2A231, 2A252, 2A232, 2A253, 2A233, 2A354, 2A334, 2A355, 2A335, 2A851, 2A831, 2A852, 2A832, 2A951, 2A931, 2A952, 2A932, 2A953, 2A933
WG-13: 2A071, 2A271, 2A272, 2A273, 2A374, 2A375, 2A871, 2A872, 2A971, 2A972, 2A973
Non-PAFSC/DAFSC applicants are encouraged to apply for the positions if experience is held, however must become compatible before appointment.
Priority Areas(s) of Consideration:
Priority consideration is first given to the areas below.
AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment.
AREA II= Current California National Guard members.
AREA III= Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment).
Military Grades: E-2 through E-6
Must maintain appropriate level of secret security clearance.
Must wear appropriate military uniform including required grooming standards.
Must maintain a compatible military unit, grade and job assignment as required by current directives.
Participation in direct deposit is mandatory.
Qualifications
General Experience: Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes; Ability to collect and analyze data effectively, efficiently, and accurately; Able to apply procedures and directives by reading and interpreting material; Ability to communicate clearly and effectively; Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.
ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12: Must have at least 18 months of experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system; Knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees; Knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems; Knowledge of applications such as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system; Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system; Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays; Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.
ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13: Must have at least 18 months experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops; Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications; Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction; Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications; Broad knowledge of the interactions among a number of closely integrated complex systems; Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc; Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex; Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units; Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
TRAINEE POSITION: Applicants not meeting full qualifications for the WG-13 position indicated above may be considered for WG-12 trainee, if qualified. Statement-of-Difference of qualification requirements for each are indicated. If appointed as trainee, the selectee may be non-competitively promoted to WG-13 upon meeting full qualifications and recommendations of supervisor.
Your qualifications will be evaluated on the following competencies:
- Arithmetic
- Electronics
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Trouble shooting (Electronic Equipment)
Military education requirements are mandatory prior to appointment. Completion of compatible Avionics Air Force Technical Training School required.
Must have been awarded a compatible primary and duty AFSC prior to appointment.
WG-13: Must have a successful completion of at least one military professional education course program.
Additional information
Recruitment/Relocation
Recruitment/Relocation Incentive IS NOT authorized.
PCS
Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest.
MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
If you are unable to apply online or need to fax a document you do not have in electronic form, please email ng.ca.caarng.list.j1-hro-recruitfedjobs-usas@army.mil or Fax to 916-854-3439.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (month/year to month/year or present) of employment and duties performed.
2. Other supporting documents: applicable documents required for qualification, education, or certification as stated above.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section above.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. No changes to the application may be made after the close date of the announcement.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
California National Guard HRO
Email NG.CA.CAARNG.LIST.J1-HRO-RECRUITFEDJOBS-USAS@ARMY.MIL
Address CA 144 FW
144th
Fresno, CA 93727
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
If you do not receive an email that your application has been received, make sure the application was correctly submitted.
False Statements - If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or you may be subject to fine, imprisonment, or other disciplinary action. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (month/year to month/year or present) of employment and duties performed.
2. Other supporting documents: applicable documents required for qualification, education, or certification as stated above.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section above.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. No changes to the application may be made after the close date of the announcement.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
California National Guard HRO
Email NG.CA.CAARNG.LIST.J1-HRO-RECRUITFEDJOBS-USAS@ARMY.MIL
Address CA 144 FW
144th
Fresno, CA 93727
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
If you do not receive an email that your application has been received, make sure the application was correctly submitted.
False Statements - If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or you may be subject to fine, imprisonment, or other disciplinary action.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOAF
