Today
Secret
Unspecified
Unspecified
IT - Hardware
Anchorage, AK (On-Site/Office)
Duties
Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs.
Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned. Advises Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Interacts directly with aircrews for mission/sortie debrief and enhanced system troubleshooting.
Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. Identifies faulty parts and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks.
Performs other duties as assigned.
Requirements
Conditions of Employment
SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position.
WG-12 - Must possess 12 months experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Skilled in performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems. Experiences included performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Skilled in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units. Capable of isolating unusual malfunctions by using technical orders, schematics, wiring diagrams, tools, and test equipment to include automatic test equipment and flight line test systems. Experiences involved solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Skilled in adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components, etc.
WG-13 - Must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems, etc.
In order to qualify as a WG-12 - The mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC.
**NOTE: In order to be considered for this position as a WG-12, applicants must submit their Technical School Certificate(s) OR a form of validation of the appropriate Technical School attendance OR their Official RIP to verify the Three Skill Level or to verify they are qualified to hold a compatible aircraft maintenance/armament/munitions craftsman Five Skill Level AFSC.
In order to qualify as a WG-13 - The mandatory military education requirements for this position is the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC.
**NOTE: In order to be considered for this position as a WG-13, applicants must submit proof of compatible Seven Skill Level AFSC.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.
Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:
- Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system.
- Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies.
- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas.
- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well.
- Knowledge and ability to perform complex mathematics including algebra and trigonometric formulas to calculate power relationships, signal phasing, etc., and to solve work related problems.
- Ability to accurately identify, isolate, repair, align, and adjust complete multi-system complex malfunctions of the aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops.
- Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops.
- Ability to isolate malfunctions of complete multiple integrated system complexes consisting of closely interrelated integrated and non-integrated systems.
Additional information
- INDEFINITE: Indefinite employees may be separated with a 30 days' notice. Indefinite employees may be converted to permanent without further competition. AKNG permanent technician will retain their permanent status if selected for this position, and may be promoted, reassigned or changed to lower grade if selected for this position, and will be required to return to their permanent position unless action is made on a permanent basis. Permanent authorization may not cross service boundaries, or funding categories, (i.e., ARNG to ANG, or 176th WG to 168th WG).
- If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
- The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
- If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
- Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of your application/resume will be made to determine your Area of Consideration (AOC) and to ensure you meet the basic eligibility and minimum job requirements. Your initial rating will be based on your responses to the questionnaire in this document. This process measures the degree to which your background matches the knowledge, skills and abilities required for this position. Your final rating will be based on our evaluation of your responses, as verified through a review of your resume and other supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your eligibility and rating.
To determine your qualifications for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
2. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
3. Any additional documentation you wish to submit for consideration
Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS. Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume:
Job Information:
- Vacancy Identification Number, title, grade and location for which you are applying.
Personal Information:
- Full name, mailing address (with zip code) and day/evening telephone numbers (with area code).
- Country of Citizenship.
- If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.
Education:
- High School name, city, state and zip code, date of diploma or GED.
- Colleges and/or Universities attended, city, state and zip code.
- Major field(s) of study.
- Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours.
Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions):
- Job title.
- Duties and accomplishments.
- Number of hours per week.
- Employer's name and address.
- Supervisor's name and phone number.
- Indicate if your current supervisor may be contacted.
- Starting and ending dates of employment (month and year).
- Salary.
Other Qualifications:
- Job-related training courses (title and year).
- Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.)
- Job related certificates and licenses.
- Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.)
Do not send copies of documents unless specifically requested.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
• To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
• Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
• After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
• You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jennifer Francione
Phone 907-428-6462 Email jennifer.r.francione.civ@army.mil
Address Alaska Air National Guard
P.O Box 5800
JBER, AK 99505
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Referral to the hiring official will be IAW our agency Merit Promotion Plan and current Labor agreement. Qualified applicants may be further evaluated by a ranking panel. Referred candidates will be further evaluated and interviewed by a selection panel.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs.
Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned. Advises Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Interacts directly with aircrews for mission/sortie debrief and enhanced system troubleshooting.
Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. Identifies faulty parts and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks.
Performs other duties as assigned.
Requirements
Conditions of Employment
- Alaska Air National Guard membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- U.S. Citizenship and Secret Clearance is required.
- Bargaining Unit: Bargaining
- APPOINTMENT FACTORS: Excepted/Enlisted in the Alaska Air National Guard.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- Incumbent is subject to termination due to loss or reduction in funding for this position.
- May require participation in random drug testing.
- MILITARY GRADE REQUIREMENT: Due to the nature of this position, the minimum military grade is Airman First Class (A1C/E3) and the maximum military grade is Technical Sergeant (TSgt/E6).
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
- Desirables: C-17 experience preferred (2A9X4)
SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position.
WG-12 - Must possess 12 months experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Skilled in performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems. Experiences included performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Skilled in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units. Capable of isolating unusual malfunctions by using technical orders, schematics, wiring diagrams, tools, and test equipment to include automatic test equipment and flight line test systems. Experiences involved solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Skilled in adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components, etc.
WG-13 - Must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems, etc.
In order to qualify as a WG-12 - The mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC.
**NOTE: In order to be considered for this position as a WG-12, applicants must submit their Technical School Certificate(s) OR a form of validation of the appropriate Technical School attendance OR their Official RIP to verify the Three Skill Level or to verify they are qualified to hold a compatible aircraft maintenance/armament/munitions craftsman Five Skill Level AFSC.
In order to qualify as a WG-13 - The mandatory military education requirements for this position is the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC.
**NOTE: In order to be considered for this position as a WG-13, applicants must submit proof of compatible Seven Skill Level AFSC.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position.
Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position:
- Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system.
- Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies.
- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas.
- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well.
- Knowledge and ability to perform complex mathematics including algebra and trigonometric formulas to calculate power relationships, signal phasing, etc., and to solve work related problems.
- Ability to accurately identify, isolate, repair, align, and adjust complete multi-system complex malfunctions of the aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops.
- Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops.
- Ability to isolate malfunctions of complete multiple integrated system complexes consisting of closely interrelated integrated and non-integrated systems.
Additional information
- INDEFINITE: Indefinite employees may be separated with a 30 days' notice. Indefinite employees may be converted to permanent without further competition. AKNG permanent technician will retain their permanent status if selected for this position, and may be promoted, reassigned or changed to lower grade if selected for this position, and will be required to return to their permanent position unless action is made on a permanent basis. Permanent authorization may not cross service boundaries, or funding categories, (i.e., ARNG to ANG, or 176th WG to 168th WG).
- If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50. You may submit your most recent performance appraisal.
- The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position.
- If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account).
- Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of your application/resume will be made to determine your Area of Consideration (AOC) and to ensure you meet the basic eligibility and minimum job requirements. Your initial rating will be based on your responses to the questionnaire in this document. This process measures the degree to which your background matches the knowledge, skills and abilities required for this position. Your final rating will be based on our evaluation of your responses, as verified through a review of your resume and other supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your eligibility and rating.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To determine your qualifications for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
2. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
3. Any additional documentation you wish to submit for consideration
Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS. Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume:
Job Information:
- Vacancy Identification Number, title, grade and location for which you are applying.
Personal Information:
- Full name, mailing address (with zip code) and day/evening telephone numbers (with area code).
- Country of Citizenship.
- If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.
Education:
- High School name, city, state and zip code, date of diploma or GED.
- Colleges and/or Universities attended, city, state and zip code.
- Major field(s) of study.
- Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours.
Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions):
- Job title.
- Duties and accomplishments.
- Number of hours per week.
- Employer's name and address.
- Supervisor's name and phone number.
- Indicate if your current supervisor may be contacted.
- Starting and ending dates of employment (month and year).
- Salary.
Other Qualifications:
- Job-related training courses (title and year).
- Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.)
- Job related certificates and licenses.
- Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.)
Do not send copies of documents unless specifically requested.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
• To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
• Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
• After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
• You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jennifer Francione
Phone 907-428-6462 Email jennifer.r.francione.civ@army.mil
Address Alaska Air National Guard
P.O Box 5800
JBER, AK 99505
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Referral to the hiring official will be IAW our agency Merit Promotion Plan and current Labor agreement. Qualified applicants may be further evaluated by a ranking panel. Referred candidates will be further evaluated and interviewed by a selection panel. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
To determine your qualifications for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
2. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
3. Any additional documentation you wish to submit for consideration
Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS. Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume:
Job Information:
- Vacancy Identification Number, title, grade and location for which you are applying.
Personal Information:
- Full name, mailing address (with zip code) and day/evening telephone numbers (with area code).
- Country of Citizenship.
- If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.
Education:
- High School name, city, state and zip code, date of diploma or GED.
- Colleges and/or Universities attended, city, state and zip code.
- Major field(s) of study.
- Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours.
Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions):
- Job title.
- Duties and accomplishments.
- Number of hours per week.
- Employer's name and address.
- Supervisor's name and phone number.
- Indicate if your current supervisor may be contacted.
- Starting and ending dates of employment (month and year).
- Salary.
Other Qualifications:
- Job-related training courses (title and year).
- Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.)
- Job related certificates and licenses.
- Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.)
Do not send copies of documents unless specifically requested.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
• To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
• Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
• After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
• You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jennifer Francione
Phone 907-428-6462 Email jennifer.r.francione.civ@army.mil
Address Alaska Air National Guard
P.O Box 5800
JBER, AK 99505
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Referral to the hiring official will be IAW our agency Merit Promotion Plan and current Labor agreement. Qualified applicants may be further evaluated by a ranking panel. Referred candidates will be further evaluated and interviewed by a selection panel.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOAF
